Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Motorized XZ-axis Linear Positioning Stages

Home > Assorted Motorized Multi-axis Actuators

Motorized XZ-axis Linear Positioning Stages
These motorized positioning tables are made of aluminum alloy with an elegant black anodized surface.

They provide up to 1000 mm of travel.

The drive mechanism is high precision crossed roller.

These linear stages are also available with a servo motors and optical encoders.

The knob mounted on the motors allow for manual adjustment. These knobs may be replaced with an optical encoders for precision position verification.

This series requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

Specifications

Structure Description

Travel
Range of Travel (mm) Pitch of Lead Screw Resolution
15 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use)
30 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use)
50 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use)
75 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use)
100 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use)
150 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use)
200 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use)
300 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use)
400 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
500 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
600 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
700 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
800 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
900 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
1000 5 mm per turn 2.5 microns (10 Micro-steps per Step Motor Driver in use)
Travel Guide

High Precision Crossed Roller

DB-9 Male Connector

 
Typical Phase Resistance 3.8 Ohms, Bi-directional
Typical Phase Current 1 Amp
 
Pin Assignment and Description
1 +5 VDC for the Limit Sensors
2 CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
3 CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
4 Return for+5 VDC
5 Not Connected
6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-
Body Material Aluminum Alloy
Surface Treatment Black Anodized

Typical Accuracy

Resolution Configuration Dependent
Maximum Speed with Stepper Motor 5 mm / sec
Maximum Speed with Servo Motor  
Repeatability 1 microns
Positional Accuracy 10 microns

Accessories Description

Optional Optical Encoders
Optional Servo Motors
 

Ordering Information

Part No. Description  
XZ110-15 Stepper Motor Driven Two-axis XZ-plane Stage, Travel  : 15 mm  
XZ110-30 Stepper Motor Driven Two-axis XZ-plane Stage, Travel  : 30 mm  
XZ110-50 Stepper Motor Driven Two-axis XZ-plane Stage, Travel  : 50 mm  
XZ110-75 Stepper Motor Driven Two-axis XZ-plane Stage, Travel  : 75 mm  
XZ140-100 Stepper Motor Driven Linear Two-axis XZ-plane Stage, Travel  : 100 mm  
XZ140-150 Stepper Motor Driven Linear Two-axis XZ-plane Stage, Travel  : 150 mm  
XZ140-200 Stepper Motor Driven Linear Two-axis XZ-plane Stage, Travel  : 200 mm  
XZ140-300 Stepper Motor Driven Linear Two-axis XZ-plane Stage, Travel  : 300 mm  
XZ140-400 Stepper Motor Driven Linear Two-axis XZ-plane Stage, Travel  : 400 mm  
XZ140-500 Stepper Motor Driven Linear Two-axis XZ-plane Stage, Travel  : 500 mm  
     
XZ-xxxx-zzzz-01 Stepper Motor Driven Two-axis XZ-axis Stage

xxxx denotes the stroke of the X-axis in mm.
zzzz denotes the stroke of the Z-axis in mm.

 

Click to Get a Quote
XZ-xxxx-zzzz-02 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis XZ-axis Stage

xxxx denotes the stroke of the X-axis in mm.
zzzz denotes the stroke of the Z-axis in mm.

 

Click to Get a Quote
XZ-xxxx-zzzz-03 DC Brush Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis XZ-axis Stage

xxxx denotes the stroke of the X-axis in mm.
zzzz denotes the stroke of the Z-axis in mm.

 
Click to Get a Quote
XZ-xxxx-zzzz-04 Stepper Motor Driven Two-axis XZ-axis Stage with 500 Cycles per Revolution Quadrature Encoder Mounted at the Back of Motor

xxxx denotes the stroke of the X-axis in mm.
zzzz denotes the stroke of the Z-axis in mm.
 

Click to Get a Quote

 

Sharing link:


 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us