About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Motorized XY Table

Home > Motorized XY Stages

The AU200-15X15 Motorized XY Stage is a high resolution, low profile, high Load Capacity, horizontal stage that can be easily integrated into any current or future application.

The large 3.54 in x 3.54 in (90 mm x 90 mm) platform has a large aperture for optical application. A solid top is also available.

The precision ground screws provide 0.59 in x 0.59 in (15 mm x 15 mm) of travel with high resolution and repeatability. Two hand knobs are mounted on the motors to provide for manual adjustment. This knob may be replaced with an optical encoder for position verification. The stepper motor may be replaced with a servo motor.

Some applications for the AU200-15X15 two-axes stage include: testing, inspection, assembly and sampling in a broad range of industrial, medical, semiconductor and research facilities.

The AU200-15X15 low profile 1.3 in (33 mm) horizontal stage is constructed with black-anodized aluminum alloy and weighs just 7.1 lbs (3.2 kg). The 2-phase stepper motor and precision 1 mm per turn lead screw offer high Load Capacity up to 22 lbs (10 kg). The moving platform has access from all four sides and the base plate has easy to access holes for mounting.



Structure Description

Range of Travel

0.58 in (15 mm)

Table Size 3.54 in X 3.54 in  (90 mm × 90 mm)
Actuator Type Lead Screw (1 mm per turn)
Travel Guide

Precision V-groove & Crossed Roller



Two Phase Stepper Motor (1.8°)

Phase Resistance 3.8 Ohm, Bi-directional
Maximum Phase Current 1 Amp
9 pin DB-9 Male Connector
Pin Assignment and Description
1,2,3,4,5 Not Connected
6 Phase A+
7 Phase A-
8 Phase B+
9 Phase B-
Base Material Aluminum Alloy
Surface Treatment Black Anodized
Load capacity 22 lbs (10 kg)
Weight 7.1 lbs (3.2 kg)

Typical Accuracy Description

Resolution 5μ(non Micro-Step)
0.25μ (20 Micro-steps per Step Motor Driver in use)
Repeatability 1.5 μ
Positional Accuracy 5 μ
Straightness 5 μ
Driving parallelism 15 μ
Pitching 50"
Yawing 25"
Backlash 2 μ

Accessories Description

Servo Motor

Optical Encoder

Mechanical Drawing

 Ordering Information

Part No. Description Amount
AU200-15x15 Motorized Linear Two-axis Stage, Range of Travel15 mm×15 mm Click to Get a Quote

Related Products

Motion Controllers

Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us